FS-DD USB 2.0, 3.x, BC1.2 Vbus Drop Droop

 495,00

USB-IF approved USB 2.0, 3.x and BC1.2 Drop Droop Test Fixture for non Type-C products.

Can be used by any brand of oscilloscope with enough bandwidth such as Rohde & Schwarz, Tektronix, Keysight / Agilent, Teledyne Lecroy, Yokogawa, …

Purchase the complete bundle with more than 10% discount.

Description

USB 3.0 extension cable

This set include two boards and the required eight 1m cables.
The drop droop load board and the USB 3.x Vbus breakout Standard A Plug

USB-IF approved USB 2.0, 3.x and BC1.2 Drop Droop Test Fixture for non Type-C products.

The following tests can be performed:

  • Measure the Vbus voltage for USB 2.0, USB 3.x and BC 1.2 products
  • Following loads are available on the drop droop board:
    • 7 static loads are available that can be set to:
      • 100mA
      • 150mA
      • 500mA
      • 900mA
      • 1500mA
    • 1 dynamic load that switch ever 1 second on/off and can be set to:
      •  100mA
      • 150mA
      • 500mA
      • External (to connect your own load)
    • All loads have a capacitance load of 10µF
    • 1m Super Speed A to B cables with a total resistance of ~170mΩ for Vbus and GND (Qty. 8)

Purchase the complete bundle with more than 10% discount.

USB-IF procedure can be found here